Counterweight

Installation requirements for hanging basket counterweights

The installation of hanging basket counterweights is a very important task in construction, which is directly related to the safety and efficiency of construction. The correct installation method can ensure the stability and service life of the hanging basket and protect the safety of construction workers. The following will introduce the installation requirements of the hanging basket counterweight in detail, hoping to help construction workers.

First, before installing the counterweight, check whether the hanging basket structure is intact, whether each component is operating normally, and whether the hanging basket rope is severely worn. If any abnormality is found, it should be repaired or replaced in time to ensure the safe use of the hanging basket.

Secondly, the installation position of the hanging basket counterweight should be selected on both sides or four corners of the hanging basket to achieve a uniform distribution effect. During the installation process, it is necessary to ensure that the counterweight is firmly connected to the hanging basket and will not loosen or shake. Fixing devices such as bolts or buckles can be used to ensure the tight connection between the hanging basket and the counterweight.

When selecting the hanging basket counterweight, it is necessary to make reasonable calculations based on the specific construction requirements and the rated load of the hanging basket. Generally speaking, the counterweight ratio of the hanging basket is 1:1.5, that is, the weight of the hanging basket is 1.5 times that of the counterweight. However, in special circumstances, such as high wind areas or complex projects that require hanging basket lintels, it may be necessary to increase the weight of the counterweight to ensure the stability of the hanging basket.

In addition, the installation height of the hanging basket counterweight also needs to be considered. In general, the height of the counterweight should be controlled within 300mm below the hanging basket suspension rope to avoid the impact of the counterweight on the hanging basket. At the same time, the counterweight near the construction personnel passage area should be equipped with protective devices to avoid accidental collision or collision of personnel with the counterweight.

Finally, attention should also be paid to the selection of materials for the hanging basket counterweight. Generally speaking, the counterweight can be selected from steel or concrete products of a certain density. When selecting steel, pay attention to its corrosion resistance; when selecting concrete products, pay attention to its strength and durability.

In summary, the installation requirements of the hanging basket counterweight include checking the hanging basket structure, selecting the installation location, ensuring a firm connection, reasonably calculating the counterweight ratio, controlling the installation height, setting protective devices and material selection. Only by strictly following these requirements can the stability of the hanging basket and the safety of the construction personnel be guaranteed.