Aluminum suspended platform

aluminum suspended platform is a kind of aerial work equipment commonly used in construction.It can provide a safe working platform outside high-rise buildings,allowing construction workers to work at a higher position.Due to its lightness,durability and easy operation,aluminum alloy hanging basket has been widely used in modern construction projects.

There are many models of aluminum alloy hanging baskets,and different models correspond to different technical parameters and application scenarios.For example,the ZLP630 hanging basket is usually used for exterior curtain wall construction,and electric hanging baskets of different lengths can be freely set and combined according to actual needs.Its rated load is 630kg,the suspension platform size is(2.5-6m)×690×1185,and the rated lifting speed is 9-11m/min.In addition,it is also equipped with corresponding safety locks and hoists to ensure the safety and reliability of construction.

The installation of aluminum alloy hanging basket is a complex process involving multiple steps and technical requirements.Before installation,sufficient preparation is required,including personnel organization,tool preparation,site investigation and safety measures planning.During the installation process,the bracket must be installed first,and then the suspension mechanism must be fixed to the bracket,followed by the installation of the wire rope and the hanging basket to the bracket.Finally,the electrical system needs to be installed and tested to ensure that the control system of the hanging basket works properly.The entire installation process needs to be strictly carried out in accordance with the construction plan,and the hanging basket must be quality inspected and accepted to ensure that its safety performance meets the standard requirements.

Composition of aluminum alloy electric hanging basket and electric hanging basket:

The suspension platform is an assembled platform.The assembled platform consists of front rails,rear rails,base frame and mounting frame,etc.The components are connected by bolts,and the standard section length is 2.5 meters or 2 meters.

The base frame of the assembled platform is welded by steel(aluminum)plates,etc.,and the bottom plate is corrugated.The mounting frame is welded by steel pipes,and casters can be installed at the bottom to facilitate disassembly and movement during operation.

The front and rear rails of the platform are welded by steel(aluminum)pipes.The height of the front rail is 970mm and is installed on the side close to the working area.The height of the rear rail is 1120mm.