How should the electric hanging basket of a building be dismantled correctly?

How should the electric hanging basket of a building be dismantled correctly?

The good performance of the electric hanging basket of a building,I believe that everyone has already understood it without saying much,because the electric hanging basket of a building has been gradually widely used in major construction industries,and it must also be properly dismantled during the application process.How should we operate it correctly?Now I will introduce it to you in detail:

1.Before dismantling the electric hanging basket of a building,first change it to cut off the power supply;

2.The platform of the electric hanging basket of a building should be parked on a flat ground;

3.Remove the wire rope of the electric hanging basket of a building,pull it up,and roll it into a disc and tighten it;

4.Remove the cable of the hanging basket from the temporary distribution box and the hanging basket,and roll it into a disc.

The electric hanging basket of a building has now become one of the equipment in major construction industries.The hanging basket needs to use a controller when it is used.So what are the outstanding features of this controller?Let's learn about it together:

1.After adding automatic balancing,the operation procedures can be simplified,eliminating the problem of unbalanced adjustment caused by the different speeds of the left and right hoists when construction workers lift the electric hanging basket of a building at high altitude.

2.After adding the time controller,the maintenance personnel of the electric hanging basket can set the power supply,operation and power-off time of the electric hanging basket in advance,which can save the time of manual operation of the electric hanging basket circuit by the construction personnel before and after work every day.

The disassembly of the electric hanging basket needs to be supervised by the personnel on the site of the hanging basket.For the electric hanging basket to be dismantled,it is necessary to confirm that there are no workers working or staying under the basket before the disassembly work can be carried out.The working platform needs to be put on the ground and then the hoist is started to be lifted out.Straighten the wire rope of the protective lock,drop the pendant hammer,and then slowly lift the wire rope out of the protective lock.Remove the cable,pull it from the ground to the roof and tie it up tightly;remove the cantilever beam,remove the bracket,move the counterweight iron,and stack it neatly for transportation.When laying the springboard in the electric hanging basket,the material of the scaffolding board should meet the requirements,be fully laid,and be firm,and there should be no probe board;the outside of the hanging basket should be closed with a dense mesh stabilizing net,and a protective top plate isolation layer should be set for multi-layer operations.The electric hanging basket should be connected to the building during operation.Clean the dirt on the surface of the protective lock of the building electric hanging basket and the debris on the stable steel wire in time,pay attention to the protective measures of the protective lock,and avoid debris from entering the lock,causing the protective lock to malfunction and fail.Check the locking function of the protective lock before operation,avoid collision with the protective lock during operation,and do a good job of protection after operation to prevent rain,snow and debris from entering the protective lock.

When the building electric hanging basket works in an environment with abrasive and adhesive materials,pay attention to the protective measures at the rope inlet to prevent debris from entering the lock.After use,clean the cement,paint and adhesive adhered to the stable steel wire rope in time to avoid blocking the parts in the lock and causing the protective lock to malfunction.The protective lock of the building electric hanging basket has a calibration cycle of every twelve months from the date of leaving the factory.When the calibration period expires,the user shall apply to the construction engineering quality inspection and testing center,and the personnel shall inspect and test it.After passing the inspection,it shall be recalibrated.

The role of the protective rope in the building electric hanging basket cannot be ignored.The protective rope is equivalent to two insurances for the hanging basket.Let's follow the manufacturer of the building electric hanging basket to see the role of the protective rope.

The connection between the protection rope of the electric hanging basket and the basket frame is made of steel wire rope with a diameter of not less thanφ13mm.The steel wire rope is used to hook the bottom of the basket frame and the safety rope.Each time the safety rope is locked,there is no more than 1m of lifting capacity.If the electric hanging basket falls off from the load-bearing steel wire rope or steel wire chain rod,the safety rope plays the role of hanging the basket frame.This method is very troublesome.The safety rope needs to be locked every 1m of lifting,and if it falls off,there will be a free fall impact of no more than 1m before the rope takes effect.The manufacturer of the electric hanging basket has newly developed a self-locking device for this purpose.The protection lock needs to be fixed on the basket frame and put on the safety wire rope at the same time.During normal lifting,the protection lock can be lifted and lowered along the safety wire rope with the electric hanging basket frame.If the basket falls off,the safety lock can automatically lock the basket frame on the safety wire rope.

And hang the load-bearing steel wire rope and protection rope on the roof beam.The operation sequence and construction method of the electric hanging basket are assembled into the basket frame on the ground with a fall chain.Then pass the heavy steel wire rope through the rope guide hole of the lever hoist toward the hook direction and press it tightly.Move the forward handle back and forth to raise the electric hanging basket.Move the reverse handle back and forth to lower it.However,do not move the upper and lower handles at the same time.If a steel chain rod is used as a load-bearing hanging rod,first hang the protective rope and the steel chain rod on the fixed roof beam,then hang the fall chain on the upper and lower parts of the steel chain rod to hang the electric hanging basket,and use the fall chain to lift it up and down.