Hot Dip Galvanizing Construction Suspended Working Platform

Introduction of Hot Dip Galvanizing Construction Suspended Working Platform:

Hot-dip galvanizing, also known as hot-dip galvanizing and hot-dip galvanizing, is a metal method mainly used in metal structural facilities in various industries. It is to immerse the rust-removed steel parts in a zinc liquid melted at about 500°C to attach a zinc layer to the surface of the steel components, thereby achieving the purpose. As a mature auxiliary construction technology, galvanized electric hanging baskets are accepted by more and more building exterior wall construction units and are used in construction projects.

The up and down power of Hot Dip Galvanizing Construction Suspended Working Platforms comes from electric hanging basket hoists. Electric galvanized hanging baskets are mainly suitable for exterior wall construction of high-rise buildings, bridge construction, chimney construction, etc.

The maintenance details of Hot Dip Galvanizing Construction Suspended Working Platforms are as follows:

1. Check the wire rope and remove the dirt and rust on it in time. Make sure all connection parts are firm and not loose.

2. Conduct sensitivity test on safety lock to ensure its normal operation

3. Check whether the components and circuits in the electrical equipment and control cabinet are damp, the contactor contacts should be kept clean and have good zero connection, and the motor bearings should be replaced or cleaned and oiled regularly

4. Frequently observe whether the bracket is tilted or not and adjust it in time;

5. Maintain the surface once a month and apply anti-rust paint;

6. Stop using it in rainy and foggy weather or when the wind force is above level 6

7 Preventively lubricate the driving chain (use kerosene) to reduce wear;

8 Regularly clean the dust on the dust bag to prevent blockage and affect the dust removal effect

9 After the operation is completed, the grounding switch in the control box must be turned to the closed position to protect the motor from damage and prepare for the next round of work.